Why Buy Portable Dishwashers

Not all have spacious kitchens or huge houses that can house free standing dishwasher models, nor can everyone afford a built in model which would incur installation costs. The simplicity of portable dishwasher models is that they can be used with as little effort as plugging in the connections to a sink or wash basin pipe which not only supplies required water, but also facilitates drainage of the water.

Quite obviously, the installation is not a permanent one and is one that can be easily removed and the appliance stowed away in a convenient storage space to be used as and when required. A factor to be checked when opting for or otherwise considering portable dishwasher models is to make sure that the motor is a reversible one servicing both the spraying of the water as well drainage of used water, without which the dishwasher may find it difficult to pump out or drain the water, what with the fact that the drain tubes may actually have to be lifted to reach into the sink.

Portable dishwashers make sense in different situations, particularly in instances of limited space. To answer the question, why buy a portable dishwasher, in households, where elaborate cooking is reserved for thanksgiving or Christmas dinners, a portable dishwasher makes perfect sense as one to be used on occasions when there is a high turnover of dishes. Most often portable free standing dishwashers are brought in to service a load of dirty dishes and then moved back or stowed away after use.

Semore Bernstein

About Dishwashers
Looking For Dishwasher Parts
Built In Dishwashers

Teach Your Teens The Zen of Dishwashing

“Water is the universal solvent” my seventh grade science teacher trumpeted with unmistakable reverence.

As with so many gems, this lesson is lost on young folks.

You have to reach the age of dishwashing, and more to the point, that pinnacle of cleansing responsibility when it’s your job to scour off baked on grease from pots and pans to appreciate the marvels of water.

Any veteran of Dish Wars can attest that it is no fun trying to remove encrusted salmon detritus from a broiling pan immediately after dinner. Letting the vessel settle overnight, with just a thin coating of soapy water will gently and silently do 99% of the work for you.

You’ll be astonished how angelic and gravity defying even the hardest sediment becomes under the quietly unrelenting persuasion of H2O.

But witnessing this transformation is a pleasure reserved only for the patient, the mature and the Zen-like among us. Teens cannot and will not wait long enough to watch nature take its steady, inexorable course.

They attack pans at the wrong time, wearing themselves out and sullying the entire kitchen in the process.

It’s sad to see strapping, 6 foot 4 inch boys, who could fell trees with dull axes, recoil from this duty and shout to the heavens, “I’m not Cinderella! Why are you making me do this?”

Another dishwashing insight that eludes teens is the fact that the machine is not a garbage disposal, and cannot be used as such, lest you want clogs in your piping that only drain doctors can remove with rooters.

Being the literalists they are, your sub-adults will wonder, “Why call it a DISHWASHER if I have to pre-scrub the dishes before I put them in?”

But this is just another Zen insight masquerading as a vexing absurdity, at least to a 16 year-old.

Why do we dress crisply and pretend to be well just before we visit the physician about our pesky colds? Isn’t it THEIR job to heal us, and not ours?

Of course, there’s a ton of Zen to be found in dishwashing, insights that could help teens and everyone else AWAKEN to deeper levels of living.

In fact, and you can announce this to your adolescents with true conviction:

DISHWASHING is the universal solvent!

Dr. Gary S. Goodman is a best-selling author of 12 books, including 101 THINGS PARENTS SHOULD KNOW BEFORE VOLUNTEERING TO COACH THEIR KIDS' SPORTS TEAMS. He has published more than 1,000 articles and considered "The Gold Standard" in negotiation, sales development, customer service, and telephone effectiveness. Top-rated as a speaker, seminar leader, and consultant, his clients extend across the globe and the organizational spectrum, from the Fortune 1000 to small businesses. He can be reached at: gary@customersatisfaction.com.

How To Replace a Dishwasher Inlet Valve

The dishwasher's inlet valve controls when hot water is delivered to the dishwasher. A solenoid powered valve is given commands from the timer control and opens and closes the valve appropriately. If your dishwasher is not filling, the problem could be a defective inlet valve.

To replace a defective inlet valve follow these instructions.

1. Turn off the power using the appropriate method; remove the fuse, turn-off the breaker, unplug the cord.

    

2. Turn off the water supply valve to the dishwasher (usually located under the sink), or disconnect hoses from the faucet.

    

3. Below the dishwasher door is a panel. The panel is either held in position with screws and is removable or is hinged to allow it to fold downwards. Remove or open the panel. This panel provides access to most of the dishwasher components.

    

4. Installed in the front area of the opening will be an inlet valve. This is where the incoming water supply to the dishwasher is automatically turned on and off depending on the dishwasher's working cycle. Each manufacturer's inlet valve looks somewhat different and the mounting configuration could place the outlet on the top or side, however you should be able to identify the unit, quite easily.

    

5. Remove the wires that power the solenoid portion of the inlet valve. In most cases the wires are connected to the inlet valve using quick connect terminals. To remove the wires use a pair of needle nose pliers and pull on the connector that is attached to the end of the wire. DO NOT pull on the wire itself, as it is more than likely that you will pull the wire out of the connector. Identify which wire goes to which terminal before removing the wires.

    

6. Newer dishwasher installations will have copper piping connected to the inlet valve, while older units will have a rubber hose. Most will be connected using a hex fitting. Using a wrench, or pliers loosen the fitting and pull the pipe or hose away from the inlet valve.

    

7. In most cases, the fill hose that is connected to the inlet valve will have a spring clamp. Using a pair of pliers grasp both ends of the clamp and squeeze inwards while sliding the clamp down the hose. In some cases the fill hose may be connected using a hex fitting similar to the inlet hose, but most likely a different size. Whichever method your manufacturer used the fill hose must be removed.

    

8. The inlet valve itself will be fixed to the frame of the dishwasher using a mounting bracket that has 2 to 4 screws holding it in place. Remove the screws and save them, as the replacement inlet valve will not have mounting screws included.

    

9. Install the new inlet valve in the same manner as the original.

    

10. Install the fill hose, sliding the clamp back up the hose.

     

11. Install the hot water copper pipe or rubber hose and tighten the fitting.

     

12. Turn the hot water shut off valve on until you hear water flow, check the fittings and ensure they are not leaking.

     

13. Replace the wires to the inlet valve, making sure that each wire is connected to the correct terminal.

     

14. Open the hot water shut off valve all the way and again look for leaks.

     

15. Replace the removable panel or raise the hinged panel as the case may be.

     

16. Turn the power back on to the dishwasher.

For more detailed information, including diagrams and pictures, visit How To Replace a Dishwasher Inlet Valve:

DIY home improvement and landscaping information available at Renovation Headquarters