Friday, February 1, 2008

The Dishwasher: A Kitchen Appliance I Cannot Live Without (I Tried)

Kitchen remodeling is one of the biggest home improvement projects that you can take on. You can help minimize the frustrations and spread out the expenses of this time consuming project by doing it in stages. One of the most helpful improvements you can make is to get a dishwasher.

I am amazed at families who live without a dishwasher. I grew up with one in every home, then when I got married we didn't have one in our first home. It was incredible how time consuming it was to wash dishes by hand. I definitely had better things to do with my time. When we moved to our next home I made sure there was one already installed, or at least plenty of room to put one. There's no way I'm doing without it again.

Dishwashers are more complicated than you'd think. They come in a variety of styles and have an astonishing range of features. There are built-in dishwashers, stand-alone dishwashers and countertop dishwashers. For instance, Bosch has a line of dishwashers that is so quiet you might forget you turned it on. I know because my mother in law has one. It's phenomenal. The most recognized are built-in dishwashers which are less visible once installed. If you have a very small kitchen and no available slot for a built in you'll need to get a portable rolling dishwasher, which are self contained units often with a counter top that can be useful for other kitchen needs. Some come with a full blown chopping block on top.

In addition to their obvious time saving factor, dishwashers can also be energy efficient. Electric dishwashers use less hot water than washing and rinsing dishes by hand. (If your spouse is complaining about the money for a dishwasher give him that fact). Many of them carry the energy star label and have special settings specifically to use less water and if you have a water softener you can use less soap, too.

If you don't have a dishwasher already I highly recommend one. From that point on you'll never voluntarily go back to hand washing again.

Get more information on dishwashers and portable dishwashers at our resource site. This is a sister site to Compact Refrigerator review.

Labels: , , ,

Monday, January 28, 2008

Three Online Sources for Dishwasher Parts

Sometimes, fixing your own appliances is not difficult and can save you a great deal of money on service calls. If you want to find dishwasher parts to replace minor problems or fix major ones, you can find affordable, quality dishwasher parts from several online providers.

A-1 Appliance Parts

A-1 Appliance Parts gives customers a wide variety of appliance parts to choose from. Dishwasher parts are easy to find with A- 1 Appliance Parts' database search feature. On their home page, you can search by your dishwasher's model number or more specifically by the part number if you know it. A more general search begins with the appliance type, in this case a dishwasher, down to the brand then to the specific part you need. This way even if you do not know the model number of the part in question, you can still find the dishwasher part that you need. They carry parts for dishwashers made b y GE, Maytag, Whirlpool, and Frigidaire as well as repair manuals to help you in your do-it-yourself dishwasher repair project.

A-1 Appliance Parts assures their customers that they handle each part carefully. They promise personal, live operators when you call during regular business hours. Your dishwasher parts exchanged through A-1 Appliance Parts will come with a one- year warranty. If you get your dishwasher part only to realize you do not need it, you can return it within 30 days for full credit as long as it was not installed or ordered as a special order.

Appliance Aid

This company found on the internet also offers an extensive selection of dishwasher parts. Models they provide parts for include Whirlpool, Kenmore, Kitchen-aid, Maytag, Magic Chef, Performa, Jenn Air, Kelvinator, Hotpoint, GE, Moffat, McClary, Tappan, and White Westinghouse. Their website allows you to search by brand and part descriptions or by part number and model number if you have that information. Many links are shared with A-1 Appliance Parts.

Part Store

Another website to find your dishwasher parts is www.partstore.com Part Store carries all the major brands. They also offer the option to buy compatible equivalents that could save you money on your do-it-yourself dishwasher repair. They have an extensive database to determine if the dishwasher part will fit with your specific model. They have an easy return policy where you call for an authorization number to return the part within 30 days. However, the warranty on their parts is only 30 days unless there is a warranty from the manufacturer. Returns must not have been installed and must be in resalable condition. Credit is given once it is received and determined to fit these conditions.

For the handy person who would like to repair the dishwasher on his/her own, the World Wide Web offers many opportunities to find dishwasher parts at affordable prices. These three sources are a good starting point to find the dishwasher part that you need.

Dan is a part-time appliances repairman and with his dishwasher website at http://www.alldishwashers.com , he gives reviews of both commercial and residential models and states common problems that he encounters with each one, with solutions! To learn more visit the portable dishwasher website.

Labels: , , , , ,

Thursday, December 27, 2007

How To Choose A Dishwasher That Will Go Well In Your Kitchen When You Are Remodeling

Did you recently deicide to start remodeling your kitchen? If you do then do you already know everything you need to do. If you don't then you might want to think about buying a dishwasher, if you don’t already own one. Even if all your kitchen remodeling plans have already been made, you should still be able to buy one. That is why you might want to think about buying a dishwasher before you go further in your plans.

One of the most frequently asked questions in remodeling is how is it possible? To some it might be a little bit more difficult, but to others it may be easier, even if you plan on buying new kitchen cabinets. When time comes to install a dishwasher properly, most homeowners either take out a piece of the cabinet or a chunk of the countertop. This will eliminate any problems you had for the space of the dishwasher. Even if you have already planned your remodeling project you can still have your dishwasher that you might still want.

If you didn’t already find out, there are so many benefits to owning your own dishwasher. One of the benefits is time saved instead of washing by hand, even if your family is really big. Average families go through three sets of dishes daily; one for breakfast, one for lunch, and one for dinner. If you don’t like washing dishes by hand and always feel like the sink is full of dishes, you could well use a dishwasher in the kitchen every day. What is nice to know about dishwashers is all you have to do is load the dishes up, put your soap in and then start washing. With most dishes and full sinks it only takes five minutes to load the dishwasher up.

As the benefits stated above, you might also not know that dishwashers come in a wide variety of styles, even thought they are all the same size, the styles are what set them all apart. It is not uncommon to see the old white dishwashers, black dishwashers, black and white dishwashers, silver, as well as stainless steel dishwashers. This will mean that it will probably be easier to find the matching piece, even after you have finished remodeling. For the best results you should just buy all the necessities you need right when you buy your dishwasher so everything matches in the long run.

The price is something else you might be happy about. Even if you are changing your kitchen in a set price range, you should be able to find the dishwasher you want at an affordable cost. Standard model dishwashers, which most come in white or black, go for as low as $150. If you aren’t buying your things in a preset budget, but looking for the dishwasher to compliment your kitchen, you might be looking to pay a bit more. High quality dishwashers sell for $1000.

Maybe it would be easier to add your own dishwasher if you were going to install it yourself as well. Many homeowners are able to install their own simply because the dishwasher is bought with directions. If you are using assistance from an expert be sure they could find the time to help you install it if you couldn’t do it yourself. Some find it the same cost whether they use help or not, but it isn’t guaranteed; you may have to pay more. Even if these payments exist depends on who you are working with.

Gregg Hall is an author living in Navarre Beach, Florida. Find more about kitchen remodeling as well as kitchen dishwashers at http://www.kitchenthingsplus.com

Labels: , , , , , ,

Tuesday, December 25, 2007

Make It Start with a Door Switch – Dishwasher Repair

You wouldn't even know your dishwasher had one until it isn’t working. These little switches are tucked inside the control panel of your dishwasher and most times are a part of the door latch. The door latch pulls the door securely to the main body of your dishwasher and prevents water from leaking during a cycle. If your dishwasher doesn't start, it could be due to a faulty door switch.

How the door switch works

When the dishwasher door is open, the switch is off. Inside your dishwasher tub will be a metal or plastic prong. Close and latch the door. The prong will depress the door switch completely and the circuit will close allowing the dishwasher to start. Check the prong to make sure it's not loose or bent and it's properly activating the door switch.

It is important to disconnect the dishwasher from its power source before attempting any repair. You can unplug the dishwasher from the outlet, remove the fuse from your fuse box, or flick the breaker switch on your circuit panel. This will prevent you from getting an electric shock.

What a door switch looks like and where it's located

Typically a dishwasher door switch is an inch long. It can be black or red and has metal prongs called terminals protruding from the body. Some door switches have two terminals and some have three.

The terminals can be a common terminal (COM), normally closed terminal (NC) or a normally open terminal (NO). Switches with only two terminals will either have a COM and a NO, or a COM and an NC. Door switches with three terminals have COM, NC, and a NO.

Your dishwasher's door switch will be behind the control panel on the front of the unit. It may be necessary to remove the inner panel of the door first. You can do this by removing a few screws. The screws at the bottom of the door are for the hinges. You do not need to remove the whole door for this repair.

Once the inner panel is removed you may find another smaller panel covering the back of the control panel held in place with screws or clips. By removing this panel you will gain access to the latch assembly housing the door switch.

How to remove the switch

Carefully use needle nose pliers to pull the wires leading from the harness off the terminals. For door switches that have a locking clip, depress the lever as you gently pull the harness away from the terminal.

Take your time while removing switches that are a part of the latch assembly or that have a bracket. If you rush and break the switch's housing you will end up having to replace more parts.

How to test your door switch

Use an ohmmeter to test the switch for continuity. This test is for door switches with three terminals.

  1. Set your ohmmeter to measure resistance at a scale of Rx1.
  2. Touch the metal tips of the test leads together and zero your ohmmeter by adjusting the thumbwheel in the front of the meter until the needles reads "0" on the scale.
  3. Touch one meter lead to the COM terminal and the other lead to the NO terminal. Do not push in on the actuator.
  4. Your meter should give a reading of infinity, meaning the circuit is open, and there is no continuity.
  5. Without moving the meter's leads, press down on the actuator until you hear a 'click'.
  6. With the 'click' of the actuator, the meter should produce a resistance reading of zero ohms. This means the circuit is closed and continuity is present. (You will only hear this click with a door switch with three terminals.)
  7. Keep the meter lead that is touching the COM terminal in place, but move the other meter lead from the NO terminal to the NC terminal.
  8. When the actuator is released, you should receive a resistance reading of zero ohms.
  9. Now set your ohmmeter to its highest resistance scale and touch one meter lead to the NO terminal and the other meter lead to the NC terminal.
  10. The resistance reading between these two leads should be infinite.
  11. Finally take a resistance reading from both the NC terminal and the NO terminal to any metal mounting hardware that is a part of the switch assembly. You should receive a normal reading of infinity.

Any readings that differ from the tests above are signs of a defective door switch that will need to be replaced.

Replace the old switch with a new one, using the same process as explained above. Reassemble the inner door panel and reconnect your dishwasher to its power supply. Don't forget to replace your fuse or turn the breaker switch back on. Run your dishwasher through a cycle to make sure it's working properly.

Total Appliance Parts: Helping you repair your dishwasher and other major appliances. Learn how to repair your own appliance and find parts for your dishwasher, refrigerator and more at EasyApplianceParts.com.

Labels: , , , , , , ,

Wednesday, December 12, 2007

Dishwasher Secrets - Make It Clean Perfectly

As a service company we are constantly asked, “Why doesn’t my dishwasher clean better”. To this query we offer the following insights and suggestions.

Whenever we diagnose a “poor cleaning” complaint the main things we want to know are:

1)Is the water hot enough, 2)are you using a proper detergent, 3) are you using a rinse additive, and 4) your loading practices.

1 Water temperature

Most manufacturers suggest a minimum 120 Fahrenheit for the dishwasher to begin the cleaning process, 140 to remove food soiling, and 155 to sanitize and remove bacteria. In restaurants they boost the dishwasher temperature to 180 Fahrenheit to satisfy health requirements. Consumers misunderstanding these requirements have led to problems for the household dishwasher.

In a dishwasher the temperature of the wash water is paramount. Unfortunately, It is now common to find household water temperatures of 100 Fahrenheit, or less.

Many people have lowered their household water temperature in an effort to be conscientious consumers. Yes, it lowers electrical consumption. Unfortunately it has other consequences.

Manufacturers say it does not provide enough heat to clean dishes properly and can leave them covered in bacteria and food residue. Supporters of lower water temperatures claim it is both environmentally friendly and necessary to protect children from any possibility of scalding at bath time.

One of the latest ideas is a mixing valve added to hot water tanks. It is preset and will not allow temperatures in excess of 115 Fahrenheit. It does this by mixing cold water with the hot to maintain this preset maximum.

This debate over hot water tank temperatures has resulted in a catch 22 type scenario. Lower the temperature to lower consumption and be more child safe, but end up leaving bacteria on the plates we use to eat.

Low water temperature can also affect the cycle length. If too low the dishwasher may keep stopping to try and heat the water. A normal cycle of 40 minutes could be extended to 2 or 3 hours with all the heating delays. Some dishwashers may stall completely.

2 Using proper detergent

We always suggest you use a name brand detergent. A good detergent is always worth the price. So stay away from those that are super inexpensive, or ones that claims to clean the dishes plus everything else in the house. If unsure, ask your neighbours what they use.

Gel or crystal, the choice is yours. Both seem to work equally well. Whichever form you prefer the one thing we always stress is, “when you find one that works for you stick with it … even if it costs more than others”.

Crystal is less messy, while gel will dissolve quicker with the water. If your water temperature is low (as described above) gel may be a choice because it will mix better.

If using crystal detergent be aware that it can pick up moisture from the air. When this happens it will swell up and become lumpy or harden. These lumps will be difficult to break down and will not fully dissolve. If at cycle’s end you see detergent left inside it may be evidence of hardened crystals.

Additional evidence of moisture buildup can be seen if the box itself appears to be swollen. If seen, replace immediately with a fresh box.

A box of detergent should be consumed within 2-3 months. If not throw it away and buy a new one. Match the box size to your needs. Do not buy a large box just because it is on sale. If you have to throw most of it away, it wasn’t much of a bargain.

Some detergent manufacturers now offer a product that combines the detergent with the rinse additive. Others offer a detergent that includes a special grease-dissolving agent. Still others are in a tab form, or inside a dissolvable plastic pouch.

Also dishwashing detergent and dishwasher detergent are not interchangeable. Trying to do so will cause problems. Each type of detergent is formulated to do a specific job.

“Dishwashing detergent” is the one used to wash dishes in the sink is. It is definitely not meant for the dishwasher. Anyone who has ever mistakenly put it into the dishwasher can attest to the mess this will produce. The beating action of the water will produce massive amounts of suds. This results in the dishwasher flooding out the door and across the kitchen floor.

So the moral of this tale is: “Don’t confuse dishwashing with dishwasher”.

3 Rinse additive

This is something that gets forgotten once the free sample bottle that came with the dishwasher has been used.

Its job is to make the water run off the dishes faster so they can dry quicker. Without it there would be little beads of water on everything at the end of the cycle. Glasses especially would appear to be water stained or be left with a gritty residue. So if poor cleaning is a problem, check the rinse additive level.

But remember, only one or two drops are added per load. A few ounces of rinse additive lasts a very long time. Such a long time those customers often think it is not being added, and blame the additive for problems it has nothing to do with

To refill, look on the dishwasher door for a cap or plug that is removable. It is often overlooked because the time between fill ups can be months. Also, the appliance manufacturers could help solve this problem if more of them added some sort of “Hey, I’m empty” indicator.

Frigidaire dishwashers have a neat little indicator. Right next to the soap dispenser is a clear plastic eye that changes colour when the additive is empty. So every time you add detergent to the machine you also see this eye staring back at you. White if empty, and black if full. Simple, effective, and smart.

4 Proper loading

Lastly, don’t forget that how you load the dishes can drastically affect how well they are cleaned.

Proper loading will allow the water to penetrate all the nooks and crannies. Try the following suggestions:

· Cups and glasses on the top rack with bottoms up

· Plates on the bottom rack all facing the same direction

· Bowls either rack, but all facing the same direction

· Utensils in the utensil holder in a mixed fashion (some knives, forks, spoons together in each compartment) to allow gaps between them

· Large items, such as a spatulas, laying down on top rack

· Pots bottom up wherever space allows (on their side okay if positioned so that water will drain out)

Placing the dishes and utensils in an orderly manner really does make for a better wash. It allows the water sprays to penetrate the dishes thoroughly. Try it … it works.

The analogy I offer customers is: If you were going on a car trip would you pack the car efficiently, or just open the doors and throw everything inside so that the passengers had to fight with the luggage. I think you get the picture.

Dishwasher efficiency

If your dishwasher is having a mechanical problem the result may show up as poor cleaning. Anything from low water pressure, broken pump, not draining fully, or even a blocked filter could be the cause.

So how do you know if the machine needs repair? You don’t. But, by checking all the previous problems first a lot of the more common causes of poor cleaning can be easily eliminated.

Also, you have probably heard this a million times before, but before telephoning for service read you owner’s manual. It can include some valuable information. It will usually give you a checklist of items to test before calling for service.

Summing up

You now know what is needed to make the dishes come out of the dishwasher sparkling clean. Hot water, good detergent, rinse additive, and proper loading practices. That’s it – that’s all. Provide all four of these things to the dishwasher and your cleaning success is guaranteed.

So load up the machine, go get yourself a liquid refreshment, put your feet up and let the dishwasher do all the work.Donald Grummett is an appliance service manager in Ottawa, Canada. In the trade over 30 years as both a technician and business owner. For more information about appliances including FAQ, Stain guide, Recycle, and Newsletter visit http://www.mgservices.ca

Labels: , , , , , , ,